Short: Calculates Picasso96 screen modes Author: cmsj@tenshu.net (Chris Jones) Uploader: cmsj tenshu net (Chris Jones) Type: driver/video Version: 0.2 Architecture: m68k-amigaos >= 3.1 Distribution: Aminet NAME umc - universal modeline calculator SYNOPSIS umc x y refresh [OPTIONS] umc x y hclock [OPTIONS] umc x y pclock [OPTIONS] DESCRIPTION umc is a modeline calculator that fully implements the Coordinated Video Timing and General Timing Formula spreadsheets published by the Video Electronics Standards Association (www.vesa.org). Simply input a desired resolution and clock frequency. All clock frequencies must be given in Hz. For a full length, mostly accurate modeline tutorial visit http://lrmc.sourceforge.net INSTALLATION Copy the umc executable somewhere like C: OPTIONS -d --doublescan Calculate a doublescanned modeline. Doublescanned modes are useful for running low resolutions on high resolution monitors, but they can also be used to display low resolutions with a very small scanline, popular gaming resolutions like 640x480 and 800x600. Doublescanned modes are not supported by many video cards. You should only use this option if you know your video card supports them. -i --interlace Calculate an interlaced modeline. Interlaced modes are useful for running very high resolutions. Interlaced modes are not supported by many video cards. You should only use this option if you know your video card supports them. -m number --margin=number Margin size as a percentage of the resolution (default = 0). All margins are equal percentage wise (i.e. %top = %bottom = %left = %right). -v number --vertical-sync=number Number of lines in vertical sync, UMC = 4, GTF = 3, CVT varies by aspect ratio as follows: 4:3 = 4 lines (default) 16:9 = 5 lines 16:10 = 6 lines 5:4 = 7 lines 15:9 = 7 lines -x --X11R6 Print modeline in X11R6 format. -f --fb Print modeline in fbset format. -p --p96 Print mode info in Picasso 96 format (default). --gtf Use General Timing Formula. To avoid any parameter conflicts always specify this option first. UMC's default calculations are equivalent to: umc x y clock -gtf -f 4 -v 4 [OPTIONS] --cvt Use Coordinated Video Timing. See -v, --vertical-sync option above for the correct number of lines to use in vertical sync. The default is 4 lines = 4:3 aspect ratio (i.e. standard PC monitor). To avoid any parameter conflicts always specify this option first. --rbt Use Reduced Blanking Timing. To avoid any parameter conflicts always specify this option first. This option is particularly useful for video cards which are unable to drive high pixel clocks (e.g. Vampire cards) ADVANCED OPTIONS -c number --character-cell=number Number of pixels per character cell (default = 8). -p number --pclock-step=number Pixel clock multiple (UMC default = 0, GTF default = 0, CVT default = 0.25). -h number --horizontal-sync=number Horizontal sync as a percentage of total active (default = 8). -f number --vertical-front-porch=number Number of lines in front porch (UMC default = 4, GTF default = 1, CVT default = 3). -b number --vertical-back-porch=number Minimum number of lines in vertical back porch (default = 6). -y number --back-porch-plus-sync=number Number of microseconds in vertical sync and back porch (default 550). -w number --horizontal-blanking-ticks=number Number of pixel clock ticks in horizontal blanking time, RBT only (default 160). -s number --horizontal-sync-ticks=number Number of pixel clock ticks in horizontal sync, RBT only (default 32). -t number --vertical-blanking-time=number Minimum vertical blanking time in microseconds, RBT only (default = 460) -M number --gradient=number The value of M used to calculate the horizontal blanking time (DEFAULT = 600). -C number --offset=number The value of C used to calculate the horizontal blanking time (DEFAULT = 40). -K number --scaling-factor=number The value of K used to calculate the horizontal blanking time (DEFAULT = 128). -J number --scale-factor-weight=number The value of J used to calculate the horizontal blanking time (DEFAULT = 20). EXAMPLES umc 1280 960 72 Calculate a modeline for a 1280x960 resolution running at a refresh rate of 72Hz. Print the modeline in Picasso96 format. umc 640 480 60 -d Calculate a modeline for a 640x480 resolution running at a refresh rate of 60Hz, doublescanned. Print the modeline in Picasso96 format. umc 1280 960 31500 -i Calculate a modeline for a 1280x960 resolution running at a horizontal clock of 31.5kHz, interlaced. Print the modeline in Picasso96 format. umc 1280 960 125000000 Calculate a modeline for a 1280x960 resolution running at a pixel clock of 125mHz. Print the modeline in Picasso96 format. AUTHOR Written by Des Jones. Amiga port and Picasso96 support by Chris Jones. BUGS THAT AREN'T BUGS Doublescanned calculations are not formally laid out in either the GTF or CVT worksheets. Though easily added, for consistency purposes the default vertical front porch and sync times were changed to be a multiple of 2. Consequently, umc calculations differ ever so slightly from VESA's. See the --gtf and --cvt options above for unmolested calculations. Only the GTF supports horizontal clock and pixel clock driven calculations. Clock frequencies must always be given in Hz, never in kHz or mHz. BUGS The fbset modeline format has never been tested. It may not work. Other bugs may be reported at http://sourceforge.net/projects/umc/ COPYRIGHT Copyright 2005 Des Jones. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. SEE ALSO lrmc(1), advv(1), gtf(1) ----------------------------------------------------------------------